Equipment List:

1. LabPro interface    
• 2 Temperature Probes (ANALOG CH1, CH2) (D8.H)
• Heat Pulser (DIG/SONIC 1) (D8.2)
2. Immersion Heater (~200W) (D8.2)        
3. Foam cups, Plastic coffee stirrers (D8.3)

General Class use:

• Thermometer for measuring room temperature (mounted on the wall)       
• Paper towels (D1.0)
• Room temperature deionized water in a 5 gallon jug per room. (How to get supplies.)
• Cooler (D7.0), (CHEMP103A3) with ice (two per room). (How to get supplies.)
• 2 graduated cylinders and 2 measuring cups marked in milliliters per room (D8.4) , (D8.5)
• Extra foam cups (about 5) (D8.0)

Notes and tests:

1. Make sure at each station you put a labeled probe in Ch.1 and an unlabled probe in Ch.2.
2. Open the file "Lab13a.xmbl" in the Class Notes/2216 Setup files/Lab 13 folder. Check that the temperature probes read data.
3. Open the file "Lab13b.xmbl" in the Class Notes/2216 Setup files/Lab 13 folder. In the program create one pulse with the heat pulser and make sure the immersion heater heats up.