Transition notes:

1. All of the materials for Lab 9 are put away except the banana plug cables which are used again in Labs 10 and 11.

Equipment List:

1. Tektronix TDS 1002 Oscilloscope
2. BK Precision 4017A Function Generator
   • 1-BNC tee (attached to the output of the function generator.)
   • 1-BNC – BNC cable (C26.H)
   • 1-BNC – Banana plug cable (C28.H)
   • 1-BNC – Alligator clip cable (C27.H)
3. BK Precision 1670A Adjustable Power Supply
4. LCR meter (BK Precision 875B) (C27.3)
5. 1-Manual Range Digital Multimeter (DMM) (C26.3) with black (C23.H) and red (C24.H) test leads
6. Pasco EM-8656 AC/DC Electronics Laboratory (C26.1)
7. Components (this is the same bag as for Lab 7): (in Ziploc bag) (C26.2)
   •  Resistor: 560 Ω
   • Capacitors: one 1 μF, one 10 μF
8. Several wires of varying lengths (5, 10, and 25 cm) (in Ziploc bag) (C26.2)
9. Banana plug cables
   • 3-red (C21.H)
   • 3-black (C22.H)
   • Four red and four black banana plug to alligator clip adapters (B2.3)
10. Knife switch (single pole, double throw) (C27.1)

Notes and tests:

1. Turn on the oscilloscope and check that the "OpenChoice" software can read data from the oscilloscopes.